Wifi & Free APP : Pair the controller with your phone via 2.4GHz Wi-Fi, the device will alarm if there are exceptions. And all exceptions will be updated to the APP, the app will push notifications to remind you. (APP: ☞InkbirdSmart)
Dual Protection : Equipped with 2 relays(current relay) to ensure that the power can be turned off under any abnormal circumstances, will protect your fish from being hurt by overheated water.
Continous Heating Alarm :The heating time can be set according to your needs from 1 hour to 72 hours. The controller will alarm once the water can not be heated to the setting temperature within the specified time. The temperature setting range is 20.0℃~35.0℃/68.0℉~95.0℉ and the measure temperature range is -40℃~100℃/-40℉~212℉.
Easy to use : Plug and Play. The 10A programmable and prewired aquarium thermostat is compatible with most kinds of heaters, no need to assemble the product yourself, just plug and play.
Dual probe for safety :The aquarium heater controller will alarm once the temperature difference between 2 probes is more than 5℉(3℃), and the app will push a notification at the same time. To protect your fish in a more safet environment.
Plug and play, easy to use
Dual relay controlling, one for control output, another for abnormal protection
Support Celsius and Fahrenheit reading
Dual display window for simultaneous display of measured temperature and stop heating temperature
Dual temperature probes to ensure the accuracy of the water temperature
High and low temperature alarm
Probe abnormal alarm
Continuous heating time alarm
Voltage: 100~240Vac 50/60Hz
Current: 10A Max
Wattage: 1200W(120Vac), 2200W(220Vac)
Type of temperature probe: R25℃=10KΩ±1%； R0℃=26.74~27.83KΩ；B25/85℃=3435K±1%
Temperature control range: 20.0℃~35.0℃/68.0℉~95.0℉
Temperature measurement range: -40.0℃~100℃/-40.0℉~212℉
Temperature display accuracy: 0.1℃/℉(<100℃/℉), 1℃/℉(>=100℃/℉)
Display unit: Celsius ℃ or Fahrenheit ℉
Ambient temperature: -20℃~40℃/-4.0℉~104℉S
torage environment: Temperature: 0℃~60℃/32℉~140℉;Humidity: 20~80%RH (Unfrozen or condensation state)
The device ONLY supports 2.4GHz Wi-Fi router!
Please follow the steps to pair the temperature controller with your phone.
Please note that both sensors have to be in the same tank.
When there is a alarm, the app will push a abnormal alarm notification to your smart phone immediately.